MyPhone A888 Duo Stock ROM (4.1.1)

Flashable Stock ROM using Custom Recovery
Features:

• Pre-Rooted
• De-bloated
• Deodexed
• Walang tweaks
• Init.d Support

Download: HERE

Read more »

MyPhone A888 DUO (4.0.4) Firmware

Things you need:

1. Windows desktop or laptop
2. USB Cable
3. Myphone A888 Duo Firmware
4. MT65xx Driver
5. SP Flash Tool

How to Flash now:

1. Create a new folder in your desktop, name it whatever you want. Copy the files that you have downloaded into that folder and extract it using 7zip or Winrar.
2. Install the MT65xx USB Preloader driver, I made an article with a detailed instruction how to install the MT65xx USB driver. For Windows 7 see “Install MT65xx USB Preloader driver in Windows 7” and for Windows 8 to the latest, see “Install MT65xx USB Preloader driver in Windows 8/8.1/10”. For some reason you will see an exclamation mark in device manager, just ignore that thing.
3. Assuming that you have successfully installed the USB driver, you can now unplug your Myphone A888 Duo from the computer.
4. Open SP Flash tool folder and find flash_tool.exe, right click and choose run as administrator.
5. From the main menu of SP Flash tool, click scatter loading button and browse the scatter file inside Myphone A888 Duo stock ROM folder.
6. After the files have been loaded, click Download button.
7. Now turn off your Myphone A888 Duo it must be completely turn off or better wait for 5 to 10 seconds once the screen has turned into black.
8. Grab the USB cable and connect your Myphone A888 Duo into the computer. The computer will now recognize your device.
9. After the computer has recognized your Myphone A888 Duo, you will see a progress bar from the SP Flash tool, it should be in the different color such as violet then yellow and so on. In some case that you encountered BROM Error, don’t panic it only means that your MP A888 Duo is not yet completely recognize, just wait for the driver installation to finish. Note you don’t need to install anything; it will automatically install since you already installed the required USB driver. Once the driver has completely installed. Remove your MP A888 Duo from the computer and repeat the process from Step 7. Make sure to plug it in the same USB port.
10. The flashing process should start now. Wait it to finish. Once you see a green circle icon and a check inside it, you can now unplug your MP A888 Duo from the computer and turn it on.

It takes 5 or more minutes to boot until you’ll welcome by the setup wizard. In that case, you have successfully restored your Myphone A888 Duo. For more guides just browse my blog. If you find it helpful kindly share this blog and don’t forget to subscribe. Thank you for reading.

Disclaimer: I do not own the firmware included in this tutorial, credits goes to the uploader.

Read more »